-
Hi,
In `SX127x_Transmit_FHSS.ino` example code, I see that the code explicitly sets the carrier frequency when a packet is successfully transmitted. However in `SX127x_Receive_FHSS.ino`, I do not s…
-
Hi,
I'm trying to use the library with a Dragino Lora GPS Hat v1.4 board on a RPi3, with no luck so far (assertion error in set_freq during calibration). Has anyone successfully used this board? Wi…
-
Hello, this is not a bug in library itself, just a warning and maybe suggestion for enhancement (adding the check). The new V2.1 modules (PCB versions 10498-V1.1 and 10497-V1.0) delivered in December …
-
Hi,
Great work on this, saved me a lot of time coding this up. Noticed that when setting the coding rate in the options it wasn't being set in the sx1276 correctly, so went digging. In the logic in…
-
Is this library dead ? examples does not seems working . also it is not maintained from long time .
-
Methods such as `LoraUtil.sendPacket` look more Java or C++ like. A more pythonic name might be `LoraUtil.send_packet`.
-
Greetings,
The datasheets of the SX127x series and the corresponding application notes suggest modifying RegInvertIQ2 when receiving LORA downlinks. I couldn't find any traces of that insinde _src/lm…
-
Hi,
I'm testing this with a LoRa32 TTGO board, using DIO0 as the RX callback. The firmware also uses the SPI sdcard driver.
```
0;32mI (741) gpio: GPIO[26]| InputEn: 1| OutputEn: 0| OpenDrain: …
ghost updated
2 years ago
-
### Current Situation
Hello,
I have two devices:
"TFA Marbella Pool Thermometer" works well with bulild_flag:
DCC1101_FREQUENCY=868.00
"Bresser Weather Center 5-in-1" works well with bulild_f…
-
I've designed a new circuit using ESP8266 and SX1278.
IO0 output of SX1278 is connected to GPIO2 input pin of ESP8266 through an inverter gate (NOT). This is required by ESP8266 since the GPIO2 pi…