-
Hello :)
Iam martin from germany and i try to connect my ttgo v21 boards with the the things network. Unfortunately I get a lot of errors in platform io so I don't know how to start. :(
**Here a…
-
hi,
I have made tests with the following setup:
- Loop (current dev)
- iPhone 5s (ios 12.4)
- Medtronic pump 522
- CGM (SG from Dexcom share)
- GNARL-code from 11.9.19
- GNARL-hardware (https…
-
Using your HAL code, I'm getting this error:
`u8g2_esp32_i2c_byte_cb u8g2_esp32_hal.c:179 (0 && "i2c_master_cmd_begin(I2C_MASTER_NUM, handle_i2c, I2C_TIMEOUT_MS / portTICK_RATE_MS)")`
I'm in the…
ghost updated
2 months ago
-
My tracker does work but has a small issue with the displayed battery voltage
It's a Lilygo T-Beam V1.1 LORA32 it does have an onboard 18650 battery.
a) when running from the onboard 18650 battery…
-
Arduino version 1.8.13
arduino-lmic v3.3
TTGO T-Beam V1.0
Board ttgo LoRa32 OLED-v1
Upload speed: 921600
Flash freq: 40Mhz
Core debug level: None
I tried to use the lmic v3.3 library, with …
-
Elvis,
Hello, Thank you for all your work. I came across this the other day.
I know it's pretty new, so you may not have gotten a lot of feedback on it yet.
Let me start I've been testing this lim…
-
I was looking at the dryad https://www.dryad.net/wildfiresensor sensors, and after a bit of research I got myself a bme680 and a cubecell ... I guess we had the same idea. I still didn't have the time…
abate updated
2 months ago
-
I've some problem with Class B device downlink.
Point: I want to make my custom board to Control Board that connect to LoRaWan and always waiting for downlink.,
Noted: Node device always connect w…
-
### Board
TTGO LoRa32-OLED
### Device Description
NA
### Hardware Configuration
NA
### Version
v2.0.11
### IDE Name
VS Code
### Operating System
Windows 10
### Flash frequency
80 MHz
###…
-
I am using a slightly midified compliance-sketch.
Main changes are UART.Interface to set the LoRaWAN registration parameters.
I temporarely published the sketch on https://bitbucket.org/thl-mot/lmi…