-
Hello,
I have tar1090 installed on an "mlat-server" and it filters out all modeS traffic. I believe that may be by design for an aggregator.
However, for MLAT traffic, the source is displayed a…
-
Hello!
I am trying to get tar1090 to receive aircraft positions from dumphfdl, via readsb, which I believe I have managed to do, with some sucess.
However, very few positions are displayed on t…
-
I use readsb+tar1090 to track ADSB signals with rtlsdr.
When I input: "readsb --device-type rtlsdr --raw --net" or "readsb --device-type rtlsdr--interactive --net", the aircraft signal can be displa…
-
Hello,
first of all, thanks for the good work on readsb and tar1090.
I'm using readsb 3.14.1631 together with tar1090 and a gps receiver. Sometimes my position on the map in tar1090 is way off, …
-
Clean install with both 1090 and 978 on the same PI. Tar1090 (and graph1090) is only showing 978 traffic. Where skyaware978 and 1090 are both showing planes. I did make the changes to the config file …
-
Hello!
I read the readsb/README-json.md ,and know that the history aircraft.json can be obtained ,from the link:https://github.com/wiedehopf/readsb/blob/dev/README-json.md#history_0json-history_1json…
-
Hi, running the tar1090/master/install script I'm receiving a error pointing to line 122, which states: [ERROR] Error in line 122 when executing: DB_VERSION_NEW=$(curl --silent --show-error "https://r…
-
I am using the tar1090 instance provided on an AWS EC2 instance. I'm new to this world, so don't rule out something silly. I'll try and provide all of the information that I feel is relevant, but if t…
-
Per https://en.wikipedia.org/wiki/High-altitude_balloon, an altitude of 176,000 ft or 53.7 km has been achieved by a balloon in 2013.
Using this calculator, https://www.qsl.net/w4sat/horizon.htm …
-
Hi,
I've updated my tar1090 instance 2 days ago (thru readsb).
I just spotted a big chunk of routes have 2 questionmarks in it;
![Naamloos](https://github.com/wiedehopf/tar1090/assets/26277207/…