-
**Is your feature request related to a problem? Please describe.**
The Sonoff B1 is a ESP8285-based wifi smart bulb.
This device is already supported in Tasmota: https://tasmota.github.io/docs/devi…
-
**Home Assistant Android app version(s):**
**Android version(s):**
14
**Device model(s):**
GALAXY Tab S7 FE
**Home Assistant version:**
2024.6.4
Tasmoadmin 4.1.1
**Last workin…
-
Just wanted to let you know that it is not possible to update stock Shelly firmware beyond 1.9.6 after using tasmota-to-mgos. It's stuck on an "Index of" page.
Tried that with 4 different Shelly D…
-
### PROBLEM DESCRIPTION
On my RfBridge flashed with Portisch firmware `RF-Bridge-EFM8BB1-20190220.hex`, after a while (I had it happen within 24 hours today) `RfRaw 177` just stops receiving RF c…
-
Hi,
Just wanted to report that m532 is tested and working too. thank you very much for this project.
Also how do I change the tasmota ble device without going through the full setup?
thanks
-
Hello,
I wanted to flash my Gosund SP111 on Tasmota.
After the backup it stuck, the new software did not load.
Now I have vtrust-recovery in the wlan and the socket does not light up, when I plug i…
Gimno updated
11 months ago
-
### The problem
System tells me to report this:
zeroconf, rest_command, api, meross_cloud.sensor, system_log, tradfri.switch, hardware, meross_cloud.humidifier, electrolux_status.number, mqtt.lock…
-
The same issue occurs for all my Tasmota devices connected to home assistant via MQTT
If I turn on a tasmota device, the device turns on, but the "turned on" status is not immediately updated in th…
-
Will ESP Easy get MQTT over SSL like Tasmota has.
On ESP32 Devices Secure MQTT works fine at Tasmota. With ESP8266 its possible, too but very very unstable.
How about adding SSL to ESPeasy ?
-
**Describe the problem you have/What new integration you would like**
There are many cases where directly unsupported HVAC devices could be added to ESPHome if a Template climate platform would e…