-
I spend several days trying to flash a TLSR8253 board with a broken firmware using several USB serial bridges with different chips: Silabs CP2102, FTDI ft232 and Microchip MCP2200. And none worked.
I…
-
Any idea if this firmware might be compatible with Mi Computer Monitor Light Bar (MJGJD01YL)? They look rather similar but haven't found any details of the internals. How about Yeelight YLTD003?
Al…
-
I have flash the TB-02 module with at example and set this module to MODE 2. It started working a iBeacon when I connect the 3.3V, GND, RX and TX by TTL to USB converter.
The module is not working in…
-
Can you add ability to change antenna power in Z2M?
I have one sensor at a fairly large distance from the Zigbee stick and some data loosing. It would be a good idea to manually control the TX ant…
-
I have successfully flashed custom firmware. Changed advertising type to Mi like
Changed advertising interval to 5 minutes
Then proceeded to flash the second thermometer. After I was done with the…
-
Hi! I'm unsuccessfully trying to dump the stock firmware from Xiaomi SJWS01LM water leak sensor that has a tslr8251 chip.
(I 'm going to write a custom firmware because I don't like how the stock one…
-
I don't know where to ask this question, sorry.
thanks for the answer.
-
Since firmware 4.3 and up I always have 100% battery in Home Assistant.
Story time:
I have multiple Xiaomi Mijia at home. Hardware revision B1.4.
Data is collected with the help of a gateway ESP3…
-
I setup and launch the chat server example at here [Chat server example](https://github.com/socketio/socket.io/tree/master/examples/chat).
And I can enter login and connect and send message using the…
-
Is it possible to run this firmware on a chip with 512Kb memory?