-
The thermocouple is measuring temperatures that are higher than expected. As as example, the following is obtained at room temperature:
![image](https://user-images.githubusercontent.com/77416463/1…
-
I have a custom T962A-Upgrade-Board https://github.com/rharrison/T962A-UpgradeBoard.
One of four MAX31850 thermocouple amplifiers is not working properly.
When i connect the board to an arduino all …
-
Ambient thermocouple temperature sensor (k-type)
* [ESPHome](https://esphome.io/components/sensor/max31855.html)
* [Adafruit](https://learn.adafruit.com/thermocouple/arduino-code)
_Originally po…
-
Ref. https://github.com/PaxInstruments/t400-firmware/issues/91
Ref. https://github.com/PaxInstruments/t400-firmware/issues/92
-
# Software Used
- CircuitPython V3 Battery Board Software
# Issue Description
For some reason after initialization of the PySquared_EPS the I2C devices do not respond in a timely manner. After ke…
-
I had a question to which pins can I connect my ad8495 thermocouple
-
### Goal
To have an initial, breadboarded HW prototype ready to enable code development
### Steps
- [x] Research thermal sensing options, select and source
- [ ] Select dev platform (MCU, …
-
Hey! I found this library because I am working with the Ocean Controls KTA259V3. I've downloaded your MAX31855 Library as well as this one and I can not seem to get the sample code to report temperatu…
-
Hello.
Help understand where to look for a malfunction.
I tested the oven for an hour. Then he waited until it cools down. Pulled out a thermocouple to test. He turned on the stove, it started, pr…
-
I am using PyDAQmx to measure temperatures via thermocouples and a NI 9213 board. I am using the normal thermocouple DAQmx call: http://zone.ni.com/reference/en-XX/help/370471W-01/daqmxcfunc/daqmxcrea…