-
I'v got an BIGTREETECH SKR 1.4 Turbo connected to the TFT 35 V2 using the RS232 Port on the TFT and the TFT port on the board. Updated the screens firmware, set the baudrate @ 250000 on both Marlin (o…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
The temperature reading from an AD595 thermocouple amplifier connected to a K type ther…
-
Begin designing a basic MCU board
Breakout pins
Add programming headers
Super basic revision 1
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
Hi, I was trying to upgrade my Ender 5 Plus with an SKR 1.4 Turbo and a RepRap full graphics …
-
discord, 04/15/2023:
gbs-c in custom preset -> passthrough, playing nintendont, went black for a second and restored
unsure if crt or gbs-c failed
no message in logs (computer was awake but locke…
-
When I try to use Marlin on my RAMPS 1.4 EFB with the MAX31855 thermocouple board and the thermocouple after compiling and uploading, Marlin goes into some kind of loop and I can't connect with pronte…
-
Come up with a preliminary design of the avionics bay on paper.
-
I was looking to upgrade my thermistors to bead thermocouples using MAX31850K devices talking to a DS2482-100 and that device speaks I2C. I looked into using SPI but realized that was already in use …
K2AAE updated
2 years ago
-
The 5V pins for the thermistor/thermocouple connectors is disabled in the default config. Add a section that enables it.
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
Marlin now reports 989 as the temperature for both E0 and E1 after the recent changes t…