-
When I add this library to WLED, then I see real issues with the network stack. Pings are intermittent and very high when you see any reply at all, like 5000ms +
If I swap to using the SPIRAM_FRAME…
-
```
fatal error: OLEDDisplay.h: No such file or directory
#include
^
compilation terminated.
exit status 1
Compilation error: OLEDDisplay.h: No such file or direct…
-
I just hit the same problem using VS Code and PlatformIO. I'm using[ this board](https://thingpulse.com/product/epulse-low-power-esp32-development-board/) and this is is my platformio.ini
[platform…
-
Setup:
I have an ESP32 firebeetle board with Chip ESP32-D0WD (revision v1.0). I usually use VScode - PlattformIO to build/flash my board, which works fine. For a colleague I wanted to test NodeMCU-Py…
-
**Describe the bug**
Run a SSD1306SimpleDemo on a Wemos D1 with SSH1103 display connected to pin D2 (SDA) and D3 (SCL)
**To Reproduce**
Steps to reproduce the behavior:
Change the following:
``…
-
## Environment
- Development Kit: ESP32-DevKitC
- Module or chip used: ESP32-WROVER
- IDF version (run ``git describe --tags`` to find it): v3.2-2
- Build System: Make
- Compiler…
-
I made a custom board using ESP32 WROOM 32U chip. I also have a bread board based test rig on which I've been flashing my test programs. The test rig runs fine with written code. However the custom bo…
-
Warning! Could not find the package with 'ESP8266_SSD1306 @ 4.1.0' requirements for your system 'windows_amd64'
-
May I'm to new to this. But I can't find which default_envs to build which uses env:lilygo-rtl_433.
The reason why I want to build it by myself is just because I must change the frequency: '-DCC110…
-
Love the work done on this!
I basically followed along the ESP32 parts list in the readme. I've managed to connect and get preset switching working, but with no display output. I think this is beca…