-
Hello, I'm working on trying to do some code on my ATTINY85 and I have one line that is causing an error when ever I try to verify the code. Here is the code:
`#include "DigiKeyboard.h"`
And here is…
-
Not sure if there's actually a way to fix this one if I'm right about what's wrong, but going to put it here for reference anyway.
I have an AVR32DB32 running with VDD = 5V, and have MVIO enabled a…
-
Hi
Suspicious bug when using AVR32DD20 and AVR64dd20 with MILLIS_USE_TIMERA0 option
Issue between wiring.h and timer.h (only for 20PINS ITEMS)
It look like CPU speed is ignored to set the rig…
-
See final comment in #383. The datasheet's electrical properties section and the UPDI section is inconsistent.
I am in the process of composing an email to my inside connection at Microchip about …
-
This is my first post so please excuse me if I have done some mistakes or did not follow the rules of a post.
My below code is working well on Arduino UNO but it is not working on AVR128DA48 Curiosit…
-
When trying to flash an ATTiny412 directly from the CLI using a pre-generated .hex file, I receive the following error:
```
$ python3 ./prog.py -d attiny412 -wd 1 -u /dev/ttyUSB0 -a write -f ./ATT…
-
Hi!
I need a rising PinChange interrupt on a not external interrupt pin on my barebones Attiny167. I need it on PCINT2
There's a Library for the Digispark PRO (from the Digistump repo) that ha…
-
It seems like Pymcuprog can read a byte from (an undocumented?) memory section that can be used to determine which silicon revision the chip is. If you're struggling with a weird bug in the MCU progra…
-
Currently you have to locate and uncomment some 20 lines in the **boards.txt** file to activate the **UPDI/Reset Pin Function** menu option on the **Tools** menu.
As HV programmers are becoming ava…
-
Grounding the Reset Pin, PF6, fails to reset the device. Tested on 5 AVR32DD14 and 1 each AVR16DD20 and AVR32DD20. Attempt to burn bootloader in case of a fuse problem, but doing so bricked 2 boards. …