-
- On Settings applet add a "I have a z axis" option
- Show Z stepdown options on the Toolpath setups (currently we have Multiple Passes, but thats without Z moves)
-
It looks like this repo got renamed. Should these pkgs be top_msgs, etc instead of opp_msgs?
Also, should this be Toolpath-Offline-Planning, toolpath-offline-planning, or toolpath_offline_planning.…
-
### Behavior
I would like to request an option to export the Toolpath as OBJ from the CLI as a new feature.
-
_From @GeertvanHorrik on November 29, 2018 13:42_
I am updating all the build scripts to use the 3.0 SDK, and most of it is working, except the embedding of resources.
```
C:\Program Files\dotnet…
-
Slight simulation issue regarding the plot_vacuum_toolpath issue when plotting it by itself. If we try to run option 4, then option 2 it doesn't quite work. This toolpath appears to be broken.
-
Based on my understanding of Noether, it should generate a toolpath in a deterministic way. Therefore recalculating the toolpath should always return the same result.
When running the `surface_ras…
-
Look into creating a DXF importer for the toolpaths, this would allow integration with most cad software and enable more complex toolpaths to be created.
Currently looked into [ezdxf](https://ezdx…
-
Keeps popping up within multiline G3s on 5th toolpath of the example CAM part.
-
I fixed the source to connect to 277D pid and not 2777 pid as originally set in code (for up2plus) and when I try to up3dload it freezes after 28.13kb
```
H:\toolpaths>dir
Volume in drive H is DATA1…
-
I'd like to request the option to define the direction of travel on the top/bottom infill (with specific relation to Archimedean Chords) so that it is possible to define if we want the infill to be la…