-
**Feature Request:** On the ‘CAN / CAN FD Transmit’ window, if a message is a multiplexed message, only display the signals for the specified multiplex value. Currently all the signals are shown which…
-
### The problem
Hello,
I use about 35 Xiaomi BLE door/window sensors, which have been working absolutely reliably for over a year via the Shelly BLE gateways (at least one active one in each room)…
-
**Describe the bug**
We are transmitting SSTV in Martin 2 mode from an SX1268. This works as expected on frequencies below 432 MHz. Changing the frequency to anything above 432 MHz (tested up to 437 …
-
When an offer is adjusted by an admin user and subsequently sent, the price is not displayed correctly in the frontend. Additionally, activities appear empty in the admin panel, even if a comment was …
-
Problem :
Before the build, I am able to discuss with the void editor using scripts/code.sh
Aft…
-
When an active HUAWEI M-Pen lite stylus is used on a HUAWEI MediaPad M5 lite tablet in the Chrome webbrowser, stylus positions are transmitted with defects shown in the screenshots below. The blue lin…
-
```
# p_transmit = rel_trans[src] * rel_sus[trg] * beta_per_dt
p_transmit = self.p_transmit(rel_trans[src], rel_sus[trg], beta_per_dt)
```
```
def p_transmit(self, rel_trans_src, rel_sus_target…
-
I am using the LibAPRS library and my problem is that the default PTT time is too short and the signal is not fully transmitted. How can I bypass it and make my own continuous TX, the signal is much c…
-
hi... how to add offset value on apps? No section to put offset. Just have offset direction and no section to put the value. When I want to transmit to repeaters, I need to use offset.
-
Hello;
What is the point of this software if transmit does not work?
Shouldn't you warn people not to bother since half the functionality of the device will be gone once flashed?
Why is there…