-
带udp-proxy参数导出的playlist的端口为7878,无法修改成udpxy或msd所转发的单播端口。博客中的--udp-proxy="192.168.1.1:4022"参数无法启动程序。
-
```
jsSetConfig('ChannelCount','187');
jsSetConfig('Channel','ChannelID="ch00000000000000000007",ChannelName="CCTV1",UserChannelID="1",ChannelURL="igmp://239.49…
-
..You should implement some sort of code that detect that User 1 IP adress 1 is using m3u 1->marked as occupied and send next IP or user to adress 2 to m3u 2. Vis a versa. This way we can add multiple…
-
回放地址现在只能由专网访问到,公网访问受阻。有IPTV的朋友可以自己加一条路由,没有IPTV的朋友只能自己尝试在光猫里加上vlan85,看看dhcp client能不能拿到专网地址了
服务器地址都没变,还是124.75.34.37,我这边是跳转到101.95.76.x。把101.95.76.0/24 124.75.34.0/24这两段地址指向了专网路由,暂时播放没有问题,但不确定跳转服务器的地…
-
### Describe the bug
Can't dial up the Internet normally through pppoe
### OpenWrt version
R23.5.1
### OpenWrt target/subtarget
mediatek/filogic
### Device
Bananapi BPI-R3
### Image kind
Self…
-
-
Did you test the limit of subscriptions using this tool?
Does this tool work as sat>ip client protocol, or each channel will be a request? i am asking this cause perexg said that when grab multiple…
-
#### Please first read the [documentation](https://github.com/xteve-project/xTeVe-Wiki/blob/master/en/configuration.md). Problems affecting the client, e.g. Plex or Emby should be reported there in th…
-
我修改r2s.config.seed,然后在action里生成r2s固件,提示Process completed with exit code 126错误
修改后文件如下,只是注释掉一些行,没有添加新的
```
CONFIG_TARGET_rockchip=y
CONFIG_TARGET_rockchip_armv8=y
CONFIG_TARGET_rockchip_armv8_DEVI…
-
### Describe the bug
I have a banana pi r4 and it worked like a charm for some months. I build the images myself all few weeks with an included configuration, so there are no changes in the configura…