-
3a+(hdmi works by default) vs 4b(hdmi doesn't work by default)
Docs used: https://www.raspberrypi.org/documentation/configuration/config-txt/video.md
Image used: 2019-07-10-raspbian-buster-lite.im…
-
### 键盘映射修改
- Window
使用软件`AutoHotkey`来修改或者开源软件[sharpkeys
](https://github.com/randyrants/sharpkeys)
或者使用`MapKeyboard`来修改(个人推荐)
2020-12-20修改
现在推荐使用[PowerToys](https://github.com/microsoft/…
-
After a lot of searching for a tool to edit EDID data and save the result to a new binary file, I came across this repo.
However, it seems that not all data is included if I run `edid2json` on my m…
r-vdp updated
1 month ago
-
First off, awesome work! This is a big improvement over the previous Mupen64Plus core. If it matters, I'm using the build from https://m4xw.net/nextcloud/index.php/s/ASMiAmQBPnP8D3w
Gauntlet Legend…
-
zhangshaoyan@YNT5:~$ v4l2-ctl --help-all
General/Common options:
--all display all information available
-C, --get-ctrl=[,...]
get the value of the controls…
-
Do not get any audio output on Bookworm with a Pi 400 connected to a IIyama HDMI monitor.
Same hardware does work fine out-of-the-box with a (clean) Bullseye installation.
When running "speaker-te…
-
I have an iMac (Retina 5K, 27-inch, Late 2014) with a Radeon R9 M295X and can't seem to get this to work. I'm using a Club3D CAC-1170 adapter to get HDMI 2.0 and a Sony X8307 TV. The same TV gets full…
kudos updated
8 years ago
-
It also fails when a dell p2212hf is attached.
It works fine when my 24 or 65" TV is attached.
This is a raspbian install with latest packages installed as of today.
If I force 640x480 mode i…
-
Add an App Intent to change any of these for a specified display:
- Brightness
- Brightness (Combined)
- Brightness (Hardware)
- Brightness (Software)
- Volume (DDC)
- Contrast (DDC)
- Red Bl…
-
Thank you for such great and easy build tool setup!!!!
Please advise on how to enable this 1.14" 135×240 SPI LCD (It is my first time with buildroot)
https://linux-sunxi.org/Sipeed_Lichee_RV
A…