-
I now get this error in the log every now and then. It is new to me, I haven't seen it before. The last words are in Dutch and in English they would mean Yonder input/output error. The word 'gindse' i…
-
Hello, lots of phone or laptop manufacturers are including optimised battery charging into their devices. What this does is halt charge at around 80% instead of holding the battery cells at 100% charg…
-
Heya friend.
when I use HA MQTT Addon and sync with your script, exist some issue? :|
I am able to get info using a local mqtt server (has you show before), but with addon .... not.
any tip?
-
using firmware v. 8
after starting a firmware shutdown
i2cset -y 1 0x17 24 30
the UPSPlus goes into a buggy state:
- 5V output power is NOT switched off (red light next to pogo pins stays on, RPi …
-
I'm testing the INA219 with a raspberry pi 3B with a voltage source and cannot read above 0,32 A, despite it being possible to get up to 3,2 A, or 0,32 V on the shunt. I consistently get current overf…
-
The script is started by launcher.sh in crontab as given in this Github project.
When I run htop, there are three exactly identical processes python3 /home/pi/UPSPlus_MQTT/fanShutDownUps.py all ow…
-
New customer here.
I notice that the battery never charges above 3.8V and the 4th led always blinks.
Is that normal?
Report from `upsPlus.py`
```
-------------------------------------------------…
-
hello.
I have running your scrypt and detect i am getting 65% (but have 4.2V).
check here: https://github.com/geeekpi/upsplus/issues/69
fanshutdown.ini:
```
[ups]
SEND_STATUS_TO_UPSPLUS_IOT_…
-
The OTA update script is not working and is giving JSON errors. I suspect that this is due to the fact the URL https://api.52pi.com/update is not working ( 502 bad gateway error). (https://api.52pi.c…
-
Thanks again for the new script version!
I prefer to write memory addresses in hexadecimal esp. because the table in the documentation is in hexadecimal.
```
if SEND_STATUS_TO_UPSPLUS_IOT…