-
# Programming the Wemos S2 Mini with Tasmota: An Easy Guide for ESP32-S2 Devices | Dialedin
Get the most out of your Wemos S2 mini by programming it with Tasmota. This ESP32-S2 based device features …
-
**Which operating system are you trying to install?**
macOS Sonoma
**Describe the bug**
Can't use device attached with lsusb
**To Reproduce**
Steps to reproduce the behavior:
1. Follow the g…
-
currently it only support device 1a86:5512 but I have 5523
```
$ lsusb
Bus 002 Device 009: ID 1a86:5523 QinHeng Electronics CH341 in serial mode, usb to serial port converter
```
try changing…
-
- *Which operating system are you using?*
**Windows 10 x64**
- *Describe the exact steps which reproduce the problem* in as many details as
possible. For example, the software/equipment which ru…
-
### The problem
After a forced shutdown caused by a power blackout, my Home Assistant installation no longer detects the Bluetooth dongle I'm using (ASUS_USB-BT500). The device appears in the hardwar…
-
**Describe the bug**
Dropped messages were observed when monitoring thousands of messages from a USB High-speed device.
It could not be reproduced with the ProtoZOA (Full-speed device).
**To Repr…
-
** Copied from a post on the Arduino Portenta H7 forum:
I'm struggling to understand why I am not finding more information about the best approach to handle the native USB Serial port on an H7, in …
-
### Is your feature request related to a problem?
There have been a number of complaints in regards to "USB Printing" polling serial devices that are not printers, and causing delays in Cura's abil…
-
Update of app-linux-usb-proxy to v1.3.0 for Qubes OS r4.3, see comments below for details and build status.
From commit: https://github.com/QubesOS/qubes-app-linux-usb-proxy/commit/9c6d6bd016486dce70…
-
Running nightly openwrt with 6.6 kernel or 23.05 with 6.1 kernel on an Allwinner v3s board (licheepi dock) causes the `page_pool_create() `error to appear in the dmesg log when using a mt7921u usb dev…