-
Hi, could you please assist with the following issue or provide hints what to try next?
### Problem
Cannot extend SDR range with [official instructions from AD]( https://wiki.analog.com/university…
-
Downloading new firmware from GitHub is not working. It returns firmware updated; the newest in the list is pieeprom-2023-01-11.bin. But there are 3 newer images available:
pieeprom-2023-05-11.bi…
-
**Describe the bug**
When upgrading to 102, and after adding `systemd-cryptsetup` as a module, automatic decryption with a tpm2 locked root drive no longer works.
**Distribution used**
Arch Linu…
-
It seems that FEL mode times out on writing on BananaPi M2 Ultra (R40).
```
$ sudo sunxi-fel version
AWUSBFEX soc=00001701(R40) 00000001 ver=0001 44 08 scratchpad=00007e00 00000000 00000000
$ su…
-
Hello, this issue could be due to my naivety, but I am unable to get your tool to boot the modified SPL and UBOOT.bin.
I am thinking this is potentially a power issue, but I would appreciate if you…
-
I have tested also this no-name card:
https://www.amazon.com/PCE2SAT-M01-PCI-2-Port-Expansion-Adapter/dp/B085LXSXDS
Card is accepted by custom kernel (compiled with SATA and Marvell support):
```…
-
```
gxl_p211_v1#mmc list
SDIO Port B: 0
SDIO Port C: 1
gxl_p211_v1#mmc dev 0
emmc/sd response timeout, cmd8, status=0x1ff2800
emmc/sd response timeout, cmd55, status=0x1ff2800
emmc/sd respons…
-
### Describe the bug
getting
sudo ./rpiboot
RPIBOOT: build-date Jun 10 2024 version 20240422~085300 4a3d3117
Waiting for BCM2835/6/7/2711/2712...
Loading embedded: bootcode4.bin
Sending boot…
-
See https://forum.openwrt.org/t/create-firmware-for-ruckus-r700/133484
### Checklist
- [ ] Booting
- [ ] How does the OEM device boot?
- [x] Q: What's the output of `help` in u-boot?
…
-
ResinOs already supports program_usb_boot_mode on Raspberry Pi 3 as stated on #283 but it want boot from USB.
The OTP memory in the SoC is programmed correctly when the device configuration variabl…