-
When AES mode is active the GUI confusingly shows "Low Power". This should have been "Low Power Mode".
Since that line is too long to fit in the Multi status icon I would recommend to rename it to …
-
I am currently trying to add a solarcharger,
to feed in data from an additional power-source (a balkony system
where i measure the power with tasmota in mqtt).
My goal is to change the mqtt-Data fr…
-
Currently the DVCC parameters are controllable by the Settings Input node, under _'DVCC System Max Charge Current'_ and _'Limit Managed Battery Voltage'_ - but there is no way to read the status of th…
-
Hello,
Writing this here, as Venus OS large is not part of the main build yet.
I would assume you are already aware of this, but it seems to me that the last version of the iOS VRM app (2.5.6)
fro…
-
Config:
Cerbo GX FW v2.82-large-30
Multiplus 24/3000/70-16 Typ:2612 FW 494 (I not II !)
BMV-700 Typ: 0x203 FW v3.11
SmartSolar Charger MPPT 250/60 Typ: 0xA068 FW v1.59
BlueSolar Charger MPPT 75/1…
-
This is needed to add remote configuration & firmware updates using VictronConnect for VE.Can-connected products.
Documentation is here in our [dbus wiki document](https://github.com/victronenergy/…
-
Reported for the Cerbo only (sofar). Report by the customer:
It seems that sometime after 2.70-11 a WiFi issue has been introduced. This continues with 2.72-2.
The symptoms:
- Everything is w…
-
Hey @Olen! I found your project via the Victron forums! I am working on a Raspberry Pi project that connects with the BMV 712 in my van. Currently I have a Node.js process running Noble (https://githu…
-
I am having a problem with the values:
com.victron.solarcharger ; "User Yield" ; Address: 790
System has 2 SmartSolarCharger MPPT 150/85
Connected via VE.Direct Port 1 & 2
VRM Instance:
258 > …
-
Via Mark Corluka:
> It is possible to specify a decimal current limit through Venus OS or VictronConnect, but only integer values are allowed when this is adjusted via Node-RED (an error is logged fo…