-
migrate from vs1053 to pcm5102
has pcm5102 white noise?
-
Hi everyone,
I am 2 days not strubbling to make ESP32 radio ready. Here are the complete details.
I using a DOIT ESP32 DEVKIT V1. For the MP3 decoder i use a VS1053B. With a line in, a line out …
-
I have no sound when I connect the instructions here
https://github.com/Edzelf/ESP32-Radio/issues/112
I want to try without VS1053
I connect ampliffer to GPIO 25, 26 and gnd - no sound again
ha…
-
[KaRadio32.bin](https://github.com/karawin/KaRadio32_4/blob/master/binaries/KaRadio32.bin), 2022-02-17 19:11 (CET)
I (2956) main: audio_output_mode 2
One of I2S=0, I2S_MERUS, DAC_BUILT_IN, PDM, VS…
-
I use this code for ESP32 DEVKIT V1 but can not played the song with a good quality after some seconds will be disconnected .
I must ESP32 S2 or more for live streaming ?
-
Hi,
nice job, but i was looking for a driver for ESP8266. Unfortunately, I am struggling to modify init part
I am using this manual https://docs.espressif.com/projects/esp8266-rtos-sdk/en/latest/api…
h1aji updated
11 months ago
-
The record_ogg.ino example does not seem to support recording more than one .ogg file without hard-resetting the board in between recordings. The first file (RECORD00.ogg) is recorded fine and plays b…
-
Tell me if I use the same code, it works on STM32, but does not see the file on ESP32
` if (card.begin(SD_CS, SD_SCK_MHZ(25)))
{
File firmware=card.open("firmware.bin");
if (firmware)…
-
I can control the radio with the web interface but I cant get any sound from the 3.5mm output of the VS1003/VS1053 (label on Controlller).
I'm using PCB made by nakedninja. Display (1.8TFT SP 128*1…
joeck updated
4 years ago
-
I have changed the wifi credentials in the radio.ini file but it still does not connect to my wifi network. Can somebody guide me through the connection part ?