-
Upgrading my Wanhao I3 board to the SKR. The first SKR 1.3 suddenly lost USB connection to my Octopi while testing the Endstops and I could never get it reconnected to the Pi or back Windows to recogn…
-
**Application Version**
3.6.0
**Platform**
Windows 10
**Printer**
Wanhao I3 Maker select (irrelevant)
**Steps to Reproduce**
Load file with bridge
Enable bridge settings
Enable "bridg…
-
Es wird schon um 8 wieder dunkel, d.h. Weihnachten naht - und langsam geht's mal an einen neuen Noko... :-)
Wer allerdings streng nach Platinenaufdruck bestückt, lötet sich einen Kurzschluss: Die Dio…
-
Hi,
i got a M3 Screw style type K thermocouple and a MAX 31865, but got no clue how to wire this correctly to the SKR-3.
The manual only states that the integrated PT1000 circuit has a much lower re…
-
**Application Version**
3.4.1
**Platform**
Mac
**Printer**
wanhao duplicator i3
[PI3_Tie Hex Unibody.3mf.zip](https://github.com/Ultimaker/Cura/files/2411032/PI3_Tie.Hex.Unibody.3mf.zip)
…
-
The nozzle option tab under the machine page of the settings menu only seems to appear under certain circumstances. The most reliable way to get it to appear is to add a second dummy printer, which fo…
-
I realy like the menu design from new h43 screen for creality.
Is it somehow possible to get this cool menu on ts35 (landscape)‽
Statusscreen would be realy nice on startscreen. Cause now on mk…
-
### Version
1.36.0
### Operating system type + version
Win7/64, run inside of Sandboxie.
### Behavior
* _Describe the problem_
When models have vertical walls of 0.8mm thickness with a 0.4mm…
-
Hello everyone.
I have a strange problem. For not knowing reasons one of my two hot end's stop working. But I will start from the beginning.
Few days ago I just finished upgrading my old Wanhao …
-
### Application Version
5.0.0
### Platform
windows 10
### Printer
Ender 3 Pro (same for Wanhao D12, CR-10...)
### Reproduction steps
1. Have a piece to slice
2. Add a mesh to change settings o…