-
How do I install CANHAT from waveshare on `CB1`. I believe it needs
```
dtparam=spi=on
dtoverlay=mcp2515-can0,oscillator=12000000,interrupt=25,spimaxfrequency=1000000
```
but not sure how to g…
-
**Describe the problem you have/What new integration you would like**
I cannot use a specific Waveshare model, and I do not know how to get it added to the ESPhome code:
[current](https://esphome.io…
-
### The problem
esp32:
board: esp32dev
framework:
type: arduino
pi:
clk_pin: 13
mosi_pin: 14
display:
- platform: waveshare_epaper
id: eink
cs_pin: 15
dc_pin:…
-
I hooked up a known working screen (Waveshare 4.3inch, works fine with FlyOS without any configuration), but there's no output when I boot this version of Armbian. Do I need to do anything specific to…
-
Hello, thank you first and foremost for your excellent work! I have a UPS expansion board with a rated voltage of 3.7V, which allows for the parallel installation of two 18650 batteries, each with a c…
-
-
I'm trying to make the Waveshare 10.1" LCD DSI to work on Rock 4B+ by porting the driver from Raspberry 6.1 kernel. I modified the code and the modules builds and loads properly. The image on LCD appe…
-
Any chance for an update for this screen, I've tried to install the the driver from their site but no luck.
Thanks
-
Hi everybody!
my objective: detection and autotracking with ov5647 picam on waveshare pt-hat on pi4 / 4GB or pi zero2 using rpos onvif
this is a user-specified issue, so afaik no bug or similar …
-
### The problem
I bought a Waveshare 7.5" display set (https://www.amazon.de/dp/B0CN96WHRC?psc=1&ref=ppx_yo2ov_dt_b_product_details):
- 7.5" display
- Label on the back: "075BN-T7" "202403180…