-
gcc -c -fpic `php-config --includes` -IWiringPi/wiringPi/ -o build/wiringpi_wrap.o wiringpi_wrap.c
Makefile:28: polecenia dla obiektu 'build/wiringpi_wrap.o' nie powiodły się
-
when i try to install wiringpi it always fail
[https://pastebin.com/VJ4mS4MG](https://pastebin.com/VJ4mS4MG)
and when i try to launch it
> sudo node remote.js
> module.js:557
> thr…
-
Nice work, I added the two interrupt methods, maybe you want to add them as well.
Use the following to compile the base so:
cc -shared wiringPi.o -o libwiringPi.so -lwiringPi
PiThreadInterrups Class:…
-
Thanks for the work translating WiringPi for the Pi5 !
Is it possible that the command gpio ... wfi ... returns the status of the GPIO (0 or 1) when the interrupt occurs ?
For example, I use gpi…
-
We currently use WiringPi to control our GPIO pins. The thing is WiringPi is designed and built as a shared library. Eventually, with our software on the prop control board, we can't have shared libra…
kh9sd updated
10 months ago
-
The compilation works and i can initialize the module.
When the first pinMode command is called it crashes with an error.
perl -e 'use wiringpi; print wiringpi::wiringPiSetup()."\n";wiringpi::pinMode…
-
The wiringPi library is critically obsolete and also hard to come by. We need to make sure that all tools that make use of this library are converted to a replacement or replaced by better solutions.
…
-
```perl
# !/usr/bin/perl
# test1.pl
use wiringpi;
use constant {
OUTPUT=>1,
INPUT=>0,
HIGH=>1,
LOW=>0
};
$SIG{'INT'}=&safe_exit;
$SIG{'QUIT'}=&safe_exit;
$SIG{**DIE**}=…
-
I have written a simple program that passes characters received over SSH onto the UART device that my OPi Zero 2 is connected to.
However, for some reason after a few messages, characters begin to…
-
**My Commands:**
`git clone https://github.com/WiringPi/WiringPi`
`cd WiringPi/`
`./build`
**Error:**
`sudo: make: command not found`
**Fix:**
`sudo apt-get update`
`sudo apt-get install m…