-
I opened https://github.com/espressif/esp-idf/pull/9288 in the hopes of improving the wolfSSL component integration with the ESP-IDF.
In the comments of the PR I learned there's a completely new an…
-
The file [wolfcrypt/src/port/Espressif/esp32_sha.c](https://github.com/wolfSSL/wolfssl/blob/master/wolfcrypt/src/port/Espressif/esp32_sha.c) has a typo in line 1523.
https://github.com/wolfSSL/wol…
-
I am a newbie, using Visual Studio to compile many times are failed, only compiled successfully once, and this successful one compiled firmware burned into the ESP32C3 and ESP8266 devices are not resp…
-
Hello,
I am running sgx-ra-tls with wolfSSL but I got the following issue raising from the client side:
`[+] Client Test:
[+] Connection with server has been established
wolfSSL Entering wolfS…
-
### Version
- WOLFSSL: **5.7.0**
- Arduino: **2.0.16**
- IDF: **4.4.7**
### Description
I can't find a comprehensive guide to replace ESP-TLS with WolfSSL.
I have inluded wolfssl in my l…
-
### Version
5.5.4
### Description
I'm was using wc_SignatureVerify, and it worked fine, so I switched to wc_SignatureVerifyHash, but now it is failing. I've included debug info further down.
Her…
-
### Version
5.7.0
### Description
The file 'api_kyber.h' is missing when included in the 'wolfssl/wolfcrypt/ext_kyber.h' file. I am using stm Cube IDE. If anyone has experienced this issue, how can…
-
### Contact Details
### Version
5.6.6
### Description
I am evaluating wolfssl for commercial use. Tests have been successful, but low performance. Attempts to enable ARM assembler for …
-
### Version
5.6.6
### Description
Follow-up on #7155
```
FAILED: esp-idf/wolfssl/CMakeFiles/__idf_wolfssl.dir/wolfcrypt/src/port/Espressif/esp32_sha.c.obj
ccache /opt/esp/tools/xtensa-es…
-
Hi!
I have issues when trying to build the bootloader firmware via cmake.
I tried to build the project using the following command:
```
mkdir build && cd build && cmake -DWOLFBOOT_TARGET=stm32…