-
I am clearly in over my head.
Goal: Take the proven fadecandy Open Pixel Control server ([GitHub link](https://github.com/scanlime/fadecandy)) and add a route for the rpi-ws281x.
The fcserv…
-
I'm having a very difficult time getting this library to work with Pi 3 Model B.
Using an 74AHCT125 level converter on my breakout board, similar to this [guide for the ws281x python library](https…
-
So I just got this installed and everything went off without a issue. But now my Led strap constantly turn off, flash white, off, back to the predefined setting, i.e. Idle colors, off, full white, of…
-
I have a fresh install of Rasbian stretch lite that is updated and upgraded.
I installed the dependencies and complied following instructions and can verify that setuptools-5.7.zip is downloaded t…
-
I'm extremely new to raspberry pi. Can anyone help?
pi@raspberrypi:~/dancyPi-audio-reactive-led/python $ sudo python3 visualization.py scroll
Cannot connect to server socket err = No such file or …
-
There seems to be a segmentation fault when calling ws2811_fini in the nodejs bindings.
Any tips on how to fix that ?
Thanks !
```c++
void finalize(const Nan::FunctionCallbackInfo &info)
{
…
natcl updated
6 years ago
-
When attempting to restart the service, I get the following errors. When I run the `klipper_ledstrip.py` command, the LED strip response as expected.
`pi@sv01-mainsailos:~/Klipper-WS281x_LED_Status…
-
When I issue the command "sudo python3 visualization.py scroll" I get an error
Traceback (most recent call last):
File "/home/pi/dancyPi-audio-reactive-led/python/visualization.py", line 418, in…
-
Hi there,
somehow ledvis is not working for me. I tried others python codes to make sure, the hardware setup (led strips and microphone) is ok, which is.
Running "sudo screen -c pi.screenrc" I see…
-
Hi,
could you give some additional information please about the settings, using or a howto. How I marry your solution with jgarff/rpi_ws281x.
Should I use apache2 on the raspi or can I use another…
Fiiti updated
7 years ago