-
### Describe the problem
I have tried to get my battery to be recognized with no success. Have tried on RPi 3 and RPi 4 with same results. On each I have tried 2 different 485 converters which I ha…
-
### Describe the bug
Last night the temperature dropped low enough for my battery heater to kick on this morning. My battery heater is programmed to turn on at 39 degrees F and turn off at 45 degre…
-
New install with faker config.
Have restarted HA.
Not sure if this is my end or other settings?
```
INFO ESPHome 2023.12.5
INFO Reading configuration /config/esphome/esp8266.yaml...
INFO Up…
-
Hi I try to toggle the charge or discharge switch, but it is not working. With the App "https://web.e77code.com/xiaoxiang-bms/" it is working.
```
21:51:02 INFO [sampling] NightPower-Akku volt=3333,…
-
### Describe the bug
The new SOC calculation leads to different SOC values shown in the Xiaoxiang app (via bluetooth on iOS) and in dbus-serialbattery.
https://github.com/Louisvdw/dbus-serialbatter…
-
### Board
ESP32 DevKitC V4
### Device Description
ESP32 DevKitC V4
### Hardware Configuration
No
### Version
latest master (checkout manually)
### IDE Name
arduino-cli
##…
-
### Is your feature request related to a problem? Please describe.
I Can't use new temperature protections functionality due to wrong BMS temperature assignments. Seems that driver detects first temp…
-
can you add the reset buton ?
i have tried it to add id but it doesnt work.
button:
- platform: restart
name: "ESP_JBD_reset"
-
Daly BMS 250A 4S
```
Paste log output between BEGIN and END:
BEGIN
s6-rc: info: service s6rc-oneshot-runner: starting
s6-rc: info: service s6rc-oneshot-runner successfully started
s6-rc: info…
-
Balancing indicators on Cell Voltages page are not showing on correct cells. The red indicators jump between cells showing 1-3 cells balancing and after a while it shows all cells balancing:
![Screen…