-
### What happened?
OTB does not support setting temperature, nor does it allow the HA climate entity to set temperature. The following tweaks made it semi-work, but this thermostat is fully supported…
-
### The problem
Since I've upgraded to 2024.1.0 my ZigBee devices (lights, switches, fans etc) are having a few seconds/minutes delay in responding to commands. I have tried to restore to previous …
-
### The problem
Since a long time I notice that my Zigbee Home Automation regularly stops working. I have around 17 devices connected with the SkyConnect dongle, also Matter with 1 Device but this ke…
-
### The problem
I've never reported an issue on Github like this before, but I am fighting getting a Sonoff Zigbee Dongle P setup. Zigbee2Mqtt is failing. MQTT wont install anymore. ZHA wont find the…
-
### Problem description
The Temperature and Humidity devices give in ZHA only half of the battery percentage that was presented in the Tuya Integration before and also in the Zigbee device configu…
-
I flashed my TS0201 to 0.1.2.1 but I'm not getting valid temperature or humidity readings once it's paired to ZHA.
![Screenshot_20240507_162042_Home Assistant](https://github.com/pvvx/ZigbeeTLc/ass…
-
### What happened?
Recently, I migrated over 60 devices from deconz (Conbee II) to zigbee2MQTT (Sonoff 3.0 ZBDongle E). It required some effort, but almost every device is functioning well under the …
nelbs updated
3 weeks ago
-
### The problem
I want to set up an automation that whenever my Zigbee water sensor (`device_id: 0123456789abcd`) "disappears" (e.g. bad reception, stolen, battery empty, destroyed etc.), I'm given…
-
Originally posted by @JohnConnett in https://github.com/kardia-as/zigpy-zboss/discussions/43 under discussions section https://github.com/kardia-as/zigpy-zboss/discussions
> _**I have an nRF5340 DK…
-
chengshitaolushenwoyaohuinongcun