-
### Board
esp32c6
### Device Description
esp32c6 dev module
### Hardware Configuration
no
### Version
v3.0.0
### IDE Name
arduino ide
### Operating System
windows 11
### Flash frequency
8…
-
**Describe the problem you have/What new integration you would like**
Please consider making ESPHome firmware as a Zigbee to MQTT bridge/gateway on hardware like ITead Sonoff Zigbee Bridge (S…
-
Hi,
How do i connect the external Zigbee antenna? I assume I have to put a jumper across the two pads next to the u.fl connector:
![IMG_2772](https://github.com/Xinyuan-LilyGO/T-ZigBee/assets/76…
-
### Problem description
I try to pair a LIDL Device (Silvercrest SAPZ A2 : a new version sold in France with power consumption measuremenst of the SAPZ A1 which already works well with ZHA) .
During…
-
See Issue #2 which contains a link to the schematics for the T-ZigBee board. However there is no clear path for a signal from the USB-C connector, through the DIP switches to the tlsr8258. RXD/TXD a…
-
BL808 list Zigbee support - can you add it??
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
### Board
esp32c6
### Device Description
esp32c6 dev module
### Hardware Configuration
no
### Version
v3.0.1
### IDE Name
arduino ide
### Operating System
windows 11
### Flash frequency
8…
-
Have you considered replacing CC2530 in DIYRuZ Flower sensor design with a new TI CC26xx MCU like the CC2652 series or similar?
Should in theory make the battery last much longer and get better sig…
Hedda updated
2 years ago
-
@tube0013 Please consider making/selling Silicon Labs EFR32MG24 / MGM240P based Zigbee Coordinator and Zigbee Router adapters:
https://www.silabs.com/wireless/zigbee/efr32mg24-series-2-modules
…
Hedda updated
7 months ago