-
Nominally we suggest PWR pins are located at the top of a symbol, and GND pins at the bottom. However this is not stated in the [KLC rules](https://github.com/KiCad/kicad-library/wiki/Kicad-Library-Co…
-
`pic32prog` fails to upload...
> $ /Users/ReiVilo/Library/Arduino15/packages/chipKIT/tools/pic32prog/v1.0.01-pic32gcc/pic32prog -d /dev/cu.usbserial-A600CMUQ -e /private/var/folders/hz/wncgspfd5wxgzm…
-
I'm really confused of how digitalRead/analogRead work.
In fact these two turn pin reporting on. In case of analogRead it floods host app with data.
On the other hand, digitalRead's callback is only c…
-
```
What steps will reproduce the problem?
1. avrdude -p m8 -b 19200 -P com8 -c avrisp -F -e -U
flash:w:"D:/desktop/atmega/SID/monijonsyn.hex":a
similar error with all other tries.
- What is the exp…
-
> there wasn’t a GNU (i.e. open source) toolchain available
I'm not sure if I understood what you meant.
There is a GNU toolchain, it is composed by `gcc`, `automake`, and similar tools. We can say …
-
The layout you suggest for installation is incorrect. It _WAS_ correct for the older versions of Arduino. 1.6 and beyond lays things out in a much better way.
Here is how I did the installation:
under…
-
```
AVR-Project-ide does not find my winavr installation.
I have used non standard installation as I do not want spaces in pathname. AVR
studio finds it ok but avr-profect-ide does not. Is there a wa…
-
I am trying to compile some of the example sketches for my arduino Zero board. It seems that the library only works for the Atmel AVR Architecture.
I am getting the following error in all of them:
`…
-
`F_CPU` is generated from the clock setting in the `project.cfg`.
Is there any reason not to use this value, to initialize `xpcc::clock::fcpu_MHz` and `xpcc::clock::fcpu_kHz`?
ekiwi updated
8 years ago
-
Stino will support more custom Boards and Cores.
### 1. Supported boards and Cores
- [x] [Arduino AVR Boards](http://arduino.cc/en/Main/Products) - Atmel ATmega-based boards from [Arduino](http://ard…