-
Hi,
I intend to install 6lbr on my naptop with ubuntu12.04,but I can't make it.
Under the example/6lbr I use the command "make all_native" but finally it print the following error message:
../../…
-
Hi,
I am following the below link from TI Wiki to configure the **6lbr** as **Router** using **TI CC2531** on **BBB**:
http://processors.wiki.ti.com/index.php/Cc26xx_sw_examples
I am able to run the…
-
-
-
```
What steps will reproduce the problem?
1. apt-get install pidgin and pidgin-musicplayer
2. start pidgin and audacious
3. Enable the musicplayer and mystatusbox plugin
4. Start wireshark
5. Start …
-
```
It seems that when using a connection with acknowledgments disabled or in
broadcast mode, the frameId is set to 0 and therefore no Tx response is
returned from the module.
This means that there…
-
```
It seems that when using a connection with acknowledgments disabled or in
broadcast mode, the frameId is set to 0 and therefore no Tx response is
returned from the module.
This means that there…
-
```
It seems that the Dummy Extended Address, named LocalIeeeEui64C, has
been included for micaz, but not for intelmote2.
As the /opt/tinyos-2.x/tos/chips/cc2420/control/CC2420ControlC.nc
file wires …
-
```
It seems that the Dummy Extended Address, named LocalIeeeEui64C, has
been included for micaz, but not for intelmote2.
As the /opt/tinyos-2.x/tos/chips/cc2420/control/CC2420ControlC.nc
file wires …
-
While trying to rebase the patches, I've tried compiling DCE on my laptop and it stopped compiling:
```
Waf: Entering directory `/home/teto/dce2/build'
[ 1/367] ./include/ns3/netlink-module.h: netli…