-
en local (sans DHCP), toutes les leds s'allument jusqu'à la 7 inclue et impossible de pinger 192.168.1.255 (ou d'autres). Le PC est bien configuré en 192.168.1.101 et 255.255.255.0. En revanche le DHC…
-
Dear Pavel,
Triggered by the CW discussion I added the “PPT-in” to my transceiver. Up to now I was using for transmission the “MOX” button or the spacebar. Transceiver is working fine and I made alre…
-
Dear Pavel
1) Just a small hint/suggestion: A hint that sdr-transceiver needs to be started on the red pitaya would help the newcomer. I wondering about the argument that either can be 1 or 2. I woul…
-
I have tried the pure signal but it doesn't seems to work with the HPSDR transceiver.
The Two tone is generated but the feedback level stays black and also the correcting stays black when starting th…
-
When setting the TUNE level in the transmit options to 10 we would assume that the output power would be 10% of the maximum output level.
There is no change at all in the output level it is always ful…
-
Bonjour l'équipe Koheron,
Nous ne parvenons pas à exécuter les commandes `make HOST= ... NAME=instrument run` car il semble qu'il y ait un problème lors du chargement du bitstream via le serveur sur …
-
CMake fails with GNULinux:
```
$ cmake -DCMAKE_TOOLCHAIN_FILE=../Ne10/GNUlinux_config.cmake ..
-- The C compiler identification is GNU 4.8.2
-- The CXX compiler identification is GNU 4.8.2
-- The ASM…
heing updated
7 years ago
-
I have tried following DC2PD's instructions but I am loosing something in translation.
I have replicated all of the PowerSDRsettings shown for General/Penny Out, General/Alex/Antenna and General/AL…
-
The SPI example - http://redpitaya.com/examples-new/spi/ works after replacing spidev1.0 with spidev2.0. I had a few more questions, and this might seem a bit pedantic, but I am seeking to understand.…
ghost updated
8 years ago
-
Hi Pavel,
Just noticed a minor error in the HPSDR transceiver. The receive attenuator has two settings 0dB or -20dB and they seem to be reversed, i.e. choosing 0dB inserts 20dB of attenuation whilst …