-
**Description**
After upgrading device firmware from v1.1.6 to v1.1.7 on a tbeam1.1-M8N-SX1262 ("Modle"), the standalone location broadcast feature appears to have stopped working. Downgrading to 1.1…
-
On TBeam v1.1, sx1262, NEO-8M with device-0.9.3 and android-0.9.04 the GPS position did not change for 15 minutes. On reset the position updates immediately.
I did test again for about 1.5 hours an…
-
DRF1262T module uses 1 pin for Antenna switching using SW pin.
I had a skype conversation with them and they said:
1. we use the PE4259 as RF switch
SW pin is used as the power supply for the …
-
@feh123 would you mind helping out by adding some more info to this bug so I can track down/fix the problem you detected.
1. run "pip3 install --upgrade meshtastic"
2. run "meshtastic --info" and …
-
Hi,
I have Tbeam v 1.1 sx1262 and heltec hardware. On both the device info screens are not still and the information is toggling automatically.
It does not matter which of the three device s…
-
TBeam v1.1 sx1262 neo8m shows "No GPS" after some random time.
Sometimes this happens after a fresh boot, but most of the time a reset is fixing the issue for another random time.
My Setup is a me…
-
**Summary:**
Integrate the drivers of these components into our repo.
- [x] Tracer (with UART)
- [x] SHTC3 (with I2C1)
- [x] LIS2DH12 (with I2C1)
- [ ] ATECC608A (with I2C2)
- [x] MX25R16…
-
Hi, it is possible to create a communication bidirectional with FSK? I need this for a confirmation send.
I'm using startReceive() to receive the data, and transmit() to send the confirmation, but do…
-
Can this function be implemented in the SX1262 module? Looks like DIO2 is already occupied by the RF switch.
-
Hey there,
Does anybody know a method for using a timer to wake up the t-beam v1.1 from sleep. So without using the button? Or is this not possible with the power management unit?
Some example co…