-
hello hansi, I also have the connection problem with the new Dev2 version, (wifi mode =1), it sometimes tells me 0.0.0.0 as ip, so (reboot), it did not do it with dev1, it automatically …
-
There seems to be no power (3.5V/5V) on the USB ports. Is there a special setting to activate the power on USB ports?
-
Please include the following information when submitting a bug report:
* The Pycom board you are using (e.g. WiPy 2.0, LoPy).
* The firmware version you are using. You can get it by executing the …
-
I noticed at the bottom left of the tool bar arduino-create-agent--> open debug console in chrome, it has a textbox and a send button. If you enter
```
list
```
It gives a list of connected d…
-
**Sketch. uploaded : I tried to run Tiny GSM SKETCH HttpClient uploaded.**
**Orange debugging Arduino console:**
Sketch uses 223482 bytes (17%) of program storage space. Maximum is 1310720 bytes…
-
Hello.
Maybe I did stupid things...
I ordered a T-beam ttgo motherboard (T22_V11-2019.1212) with Meshtastic software on it.
I uploaded an esp-32-ogn software that I used before, but I didn't se…
-
### The problem
When you enable the camera on the I2C bus the scan will detect all the I2C devices yet only the Camera seems to optimizes the bus and no other devices respond.
ssieb pointed to t…
-
Hello, I'm new to this.
With Arduino UNO, there are TX and RX pins for me to establish UART connection.
Which pins can I use to for TX and RX? Thanks.
-
I've been seeing odd behaviour that all entities for my HIGrow show as _unavailable_ in Home Assistant after a period of time. I found this odd as the device is running from the mains and TIME_TO_SLEE…
-
Hello,
I bought a TTGO Call board.
I think it was working ok.
I tried inserting a SIM card, powered on, the light flashed quickly and then slow.
I called the number and it was ringing.
I flash …