-
```
What steps will reproduce the problem?
- try to send packet with length 15 bytes and more of payload without
RF230_SLOW_SPI defined or slightly more bytes with RF230_SLOW_SPI defined
What is th…
-
Submitted by: Artur (artur)
Attachments:
[41304Re40f5be.dmp](https://github.com/FirebirdSQL/jira-attachments/raw/main/CORE/CORE-4856/12816_41304Re40f5be.dmp)
[6732R11de2b6.dmp](https://github.com/Fir…
-
```
It seems that the Dummy Extended Address, named LocalIeeeEui64C, has
been included for micaz, but not for intelmote2.
As the /opt/tinyos-2.x/tos/chips/cc2420/control/CC2420ControlC.nc
file wires …
-
From RFC https://tools.ietf.org/html/rfc4861#section-4.6.2 :
```
Prefix An IP address or a prefix of an IP address. The
Prefix Length field contains the number of valid
…
-
I pull latest Contiki from github and build Very Sleepy Demo for CC2650STK. After I download and run it on my CC2650STK. I see the Contiki version is Contiki-2.6-2461-g7dc8ace from UART output like th…
-
```
What steps will reproduce the problem?
- try to send packet with length 15 bytes and more of payload without
RF230_SLOW_SPI defined or slightly more bytes with RF230_SLOW_SPI defined
What is th…
-
```
It seems that when using a connection with acknowledgments disabled or in
broadcast mode, the frameId is set to 0 and therefore no Tx response is
returned from the module.
This means that there…
-
Sorry for the flood of questions. I feel like the answers should be obvious to me, but after hours of trawling through past issues and mailing lists I still have no idea what I'm doing wrong.
I've go…
-
```
It seems that when using a connection with acknowledgments disabled or in
broadcast mode, the frameId is set to 0 and therefore no Tx response is
returned from the module.
This means that there…
-
```
What steps will reproduce the problem?
- try to send packet with length 15 bytes and more of payload without
RF230_SLOW_SPI defined or slightly more bytes with RF230_SLOW_SPI defined
What is th…