-
Hi,
Apparently, no implementation of a GPIO driver is planned.
This could be useful in some library where it is necessary to :
- read the state of an gpio input (get a state)
- set a gpio outpu…
-
┌──(leslie㉿kali)-[~/rtl8812au]
└─$ sudo make && make install
[sudo] password for leslie:
make ARCH=x86_64 CROSS_COMPILE= -C /lib/modules/6.1.0-kali9-amd64/build M=/home/leslie/rtl8812au modules
…
-
### Environment
- OS and Version: Ubuntu 22/04
- VS Code Version: 1.73.1
- C/C++ Extension Version: 1.15.0
### Bug Summary and Steps to Reproduce
Bug Summary:
Steps to reproduce:
…
weiqj updated
1 month ago
-
When I boot the laptop, sometimes the module crashes during the initial load, and sometimes it gets loaded successfully but then after some time it crashes. I was able to capture the stacktrace. Let m…
-
hi there. i am unable to remove the backround music device from my sound prefrences after removing your app. i have tryed both the uninstall.sh file which did nothing at all. and also tryed manualy un…
-
The current embedded-hal CAN trait seems to only support 'transmit' and 'receive', but commonly higher level applications will need support at least:
- Opening and closing the node
- Setting the b…
-
Hello.
I've been trying to get an I2S transmit stream to work. I've been using the following configuration from the [i2s-audio-out example](https://github.com/stm32-rs/stm32f4xx-hal/blob/master/exa…
-
llvmpipe is selected by blade instead of the hardware vulkan capable gpu
vulkaninfo
```
Devices:
========
GPU0:
apiVersion = 1.1.85
driverVersion = 32.3.1.0
vendorID …
-
**Describe the bug**
drivers/serial/uart_nrfx_uarte.c Builds with warnings nrf54l20pdk/nrf54l20/cpuapp and therefore fails in twister for at least these tests in main:
* tests/drivers/build_all/w1…
-
### Check for existing issues
- [X] Completed
### Describe the bug / provide steps to reproduce it
Zed editor doesn't launch either as a dedicated package (`zed-editor`) or as a Flatpak in Ni…