-
Since some beta version, the teleinfo information are no more automaticaly updated, and I have to set a delay on the device in order to restart it every minutes in order to get the information again.
…
-
Hi,
I believe there is some problem when using a dummy dimmer switch.
If I turn off the dim switch when the dimlevel is set it won't go back to that level when the lamp is turned on.
Example:
If I c…
-
Example device:
20;39;AlectoV3;ID=00a7;TEMP=80c0;HUM=3d;BAT=OK;"
Values should be one of: temp, hum, baro, hstatus, uv, lux, rain, raintot, winsp, awinsp, wings, windir, winchl, wintmp, co2, sound, …
-
Since the update of Domoticz (beta) the plugin is not working.
-
Domoticz package does not contain native Openzwave which prevented me to recognize a usb stick Zwave . Can be integrate Openzwave to domoticz package or create a Openzwave package?
##
Want to back t…
-
Hi Ross - not an issue as such - was curious, referring to your source binary that you sniffed.
Have you hex-to-binary'd the unit's serial number stamped on the rear of the case & on the PCB, to see …
-
Maybe a few days early to to ask this, but do you think that OpenHAB could and will support different wireless protocols for home automation via LimeSDR?
http://limesdr.org
LimeSDR is (or rather wil…
Hedda updated
8 years ago
-
I'm getting a lot of errors since the last update of pimatic:
```
22:47:43.268 [pimatic] info: Loading plugin: "pimatic-rflink" (0.4.0)
22:47:45.665 [pimatic] error: Invalid config of pimatic-rflink:…
-
[Reference on Domoticz forums](http://www.domoticz.com/forum/viewtopic.php?f=36&t=10272&p=73901#p73894)
```
{
"AddjMulti" : 1.0,
"AddjMulti2" : 1.0,
"AddjValue" : 0.0…
-
Hello,
Within Domoticz I have 2 lights, one behind an on/off switch and one behind a dimmer. When connected to homebridge, the on/off light show up with dimmable aspects and the dimmable light shows …