-
Not really an issue, but making a note here to correspond to a similar one in the SAMD51-Camera-Demo repository.
I’m making an effort at unifying at least three different attempts/implementations a…
-
When writing crate definitions, it is quite common to make mistakes and this breaks the **alr** command. When it happens, you have no clue why it breaks and which crate definition was involved.
Ex…
-
Please add [MySQL_MariaDB_Generic](https://github.com/khoih-prog/MySQL_MariaDB_Generic) to Library Manager.
Thanks and Regards.
---
This [MySQL_MariaDB_Generic library](https://github.com/khoi…
-
**Describe the bug**
After activating `LOG_BACKEND_FS`, `CONFIG_FILE_SYSTEM_LITTLEFS` and their dependencies, it worked as expected on the very first time boot (clean storage partition).
The probl…
-
I tested using I2C. There were no errors, it just didn't display anything. It does work with the absolute latest, however when it does an autoreload it does not run until you unplug and replug in the …
-
As reported by a Discord User, accessing a Character LCD fails on a Raspberry Pi Pico
The same example runs normally on a metro-esp32s2
For this example I used SCL on GP1 SDA on GP0
```
…
-
I am looking at the code and it looks like this should work on anything that uses `cortex-m = "~0.5"`. Is that right? Should this repo have a more general name?
-
If you swap the SERVO pin with M1_PWM, then it's marginally easier to control the PWM lines for both motors with the SAMD51. PA18 and PA19 default to the same TCC and TC, which would make timer (frequ…
gcl8a updated
4 years ago
-
I cannot compile the current Marlin 2.0.x branch for my SKR mini E3-DIP V1.1. I've tried on both Windows and Linux and switched back to the example config from Configurations-release-2.0.7.2 for this …
-
Please add [MDNS_Generic](https://github.com/khoih-prog/MDNS_Generic) to Library Manager. Thanks.
This is an mDNS Library to support mDNS (Registering Services) and DNS-SD (Service Discovery).
T…