-
### Bug Description
I just installed an SKR Mini E3 v2.0 on my Ender 5 and flashed with the latest `bugfix`.
Oddly, my Y axis is moving only 25% of what it should. My e-steps are 80,80,400.
T…
-
### Bug Description
my setup:
Ender 3 Pro w/ Skr mini e3 1.2
BLT 3.1
Bullseye mount @ -48, -10
Bed: PEI flex sheet
6x6 grid with multiple_probes = 2 for weighted accuracy
[Config.h](http…
nfons updated
4 years ago
-
I am running an SKR e3 Mini v1.2 on my Ender 3 pro.
I have compiled Marlin 2.0.1 and most functions are working correctly.
I am trying to set the Min Probe edge to have a more symmetrical probin…
-
When setting #define SPEAKER, the speaker doesn't work.
When setting //#define SPEAKER, the buzzer works properly.
Our BEEPER (buzzer) pin is PB5
I am not sure what the SPEAKER pin is, or if it i…
-
Guys, I develop the first version of this feature and to be more intuitive the coordinates of the probing point where the absolute position of the probe. It means that some one that is gathering point…
rmcbc updated
3 years ago
-
### Bug Description
Auto bed leveling (bilinear) is moving Z axis only to the half of required distance
### My Configurations
**Required:**
Marlin 2.0.5.3 (released)
BL touch 3
Configurat…
-
Hello Everyone.
Trying to compile a firmware. Haven't done too many changes, just the enviroment, board, serial ports and enabled steppers.
SKR GTR v.1.0
When compiling it gives an error str…
SevCr updated
4 years ago
-
### Bug Description
When doing a `G29 S-1` on factory defaults, lots of gcode commands are written to the console.
After a `G29 P1` has completed, `G29 S-1` does not output any gcode.
### My …
-
### Description
Using a cloned BLTouch (one with "3DTouch written on the side) enabling the part fan (set to every level I've tested) will cause the probe to periodically deploy on its own for no…
-
### Bug Description
Double click for babystep no longer works on my Ender 3 Pro with SKR Mini E3 v1.2 on https://github.com/MarlinFirmware/Marlin/commit/1475fd312a1572e1d43978f669bce02a72f63dab…
Knifa updated
4 years ago