-
[SX1278] Initializing ... failed, code -2
How to solve it ? Thank you
-
Hello,
I struggle with achieving long range of LoRa modules. I use 2x Ra-02 433Mhz (SX1278) modules with 3dBi antennas and longest range that i achieved was 400m LOS. I know that 10km range can be ac…
-
Implement the radio driver in `dev/radio.h` for the SX1262 on the keystone platform. Doing so will allow the LoRa radio to be available to the netstack with:
* `#define NETSTACK_CONF_RADIO=sx126x_lo…
-
When compiling the 'groundstation.ino' for Fossasat-1 and selecting SX126x chipset, the code that successfully calls getFrequencyError for SX127x fails.
This is because getFrequencyError is not imp…
-
I have successfully used your library to communicate 2 modules together but seem to have an issue when I try to use Ethernet at the same time.
Here is the Ethernet, ESP32 I am using:
https://www.…
-
I really like this idea.
Im building a testing one today here in Cape Town.!
Patrick
ZS1dBm
-
hi, i'm new to arduino and try to run the sample project LoRaWan and i encountered some problems aout the compiling like:
libraries\SX126x-Arduino\mac\region\Region.cpp.o:(.literal.RegionGetPhyParam…
-
I said it before but again: Awesome Job and thanks for sharing the library with us!
## [Summary]
Using SX1262, Arduino Pro Nano if a second device that uses SPI added to the sketch, even after th…
-
After a lot of testing/debugging, finally got the RF Solutions LAMBDA62C modules to work!
The previous remark regarding using LDO instead of DC-DC appears to **not** be the issue., DC-DC circuit is…
-
Hi,
I'm trying to decode whitened FSK packets transmitted from SX127x, and I was wondering whether you could share the whitening polynomial? The one in the datasheet (x^9 + x^5 + 1) seems incorrect…