-
```
D3200 is detected but info in green on screen is not updated unless you select
disconnect usb and reconnect. Also. No live view. Changing settings works
great
```
Original issue reported o…
-
```
D3200 is detected but info in green on screen is not updated unless you select
disconnect usb and reconnect. Also. No live view. Changing settings works
great
```
Original issue reported o…
-
```
D3200 is detected but info in green on screen is not updated unless you select
disconnect usb and reconnect. Also. No live view. Changing settings works
great
```
Original issue reported o…
-
```
D3200 is detected but info in green on screen is not updated unless you select
disconnect usb and reconnect. Also. No live view. Changing settings works
great
```
Original issue reported o…
-
**Description**
When compiling fot the Seeeduino Xiao ESP32C3 board, the following error happens:
```
c:\users\damien\.platformio\packages\toolchain-riscv32-esp\riscv32-esp-elf\include\c++\8.4.…
-
Any interest in the participants from kylelemons/gousb#9 (@zagrodzki , @nkovacs, et al) reviving the work on the hotplug event support in this version?
(My own golang/c skills are woefully inadequ…
-
```
D3200 is detected but info in green on screen is not updated unless you select
disconnect usb and reconnect. Also. No live view. Changing settings works
great
```
Original issue reported o…
-
I: Bus=0003 Vendor=05ac Product=061c Version=0111
N: Name=" Gamesir-T4 1.25"
P: Phys=usb-xhci-hcd.0.auto-1.1/input0
S: Sysfs=/devices/platform/ff500000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1…
hmony updated
1 month ago
-
Looks like make checks out needed submodules, but ... not in time or something:
```
sudo apt install gettext gcc-arm-none-eabi libnewlib-arm-none-eabi build-essential libffi-dev pkg-config
git c…
-
```
D3200 is detected but info in green on screen is not updated unless you select
disconnect usb and reconnect. Also. No live view. Changing settings works
great
```
Original issue reported o…