-
Error compiling Factory demo example code:
Compilation error: esp_vad.h: No such file or directory
#include
What is the library dependency?
-
even simple gpio
```
#define LED PB9
void setup(){
pinMode(LED, OUTPUT);
digitalWrite(LED, LOW);
delay(500);
digitalWrite(LED, HIGH);
delay(500);
Serial1.begin(57600…
-
This library seems to soft-lock the Rpi Pico (RP2040) after setting up SPI pins, which can be caused by improper SPI channel & pin assignment. https://arduino-pico.readthedocs.io/en/latest/spi.html
H…
-
I am using version 1.0.9 on esp32.
My keyboard is logitech g100s and it supports usb and ps2.
After pressing any LOCK key, nothing happens when I press any key until I reconnect the keyboard.
Se…
-
I kindly request the inclusion of the Heltec Wireless Tracker board in the list of supported boards for PlatformIO. The Heltec Wireless Tracker board is an ESP32-based development board with built-in …
-
Hi.
It would be nice to provide the [official EEPROM header](https://www.arduino.cc/en/Reference/EEPROM) to be used in ATtiny families, commonly present in [Digispark boards](http://digistump.com/p…
-
### The problem
I've been attempting to add a bluetooth proxy to ESPHome however when I press the install, I can never get it to complete the job. It keeps failing at "Installing platformio/framework…
-
https://www.u-blox.com/en/product/evk-bmd-3035#tab-documentation-resources
-
Hi,
I installed the script on the ESP32 board and added it to Home Assistant.
And... how to start pairing with the lamp?
I turn on the lamp and press the pairing button on the remote control.
How …
-
## Problem
UART Tests cannot be done by Loopback on D0/D1 because some boards (Nucleo / nRF / etc) only have a single UART and use the same peripheral for the Serial Debug lines used by greentea. Thu…