-
### The problem
When you enable the camera on the I2C bus the scan will detect all the I2C devices yet only the Camera seems to optimizes the bus and no other devices respond.
ssieb pointed to t…
-
Hello. I greatly appreciate your hard work toward this project!
A few months ago, my Apple MacBook Air (M1, 2020) was exposed to some water near the USB-C ports. After thorough drying, one of the t…
-
### Describe the bug
I’m facing sporadic disconnect issues after a while (sometimes one hour, sometimes a day or a bit more). Venus OS doesn’t recognize the disconnect as values don’t get updated. Af…
-
### Describe the bug
**My Setup**
Victron Cerbo GX
Victron MPPT 250|100 Solar Charge Controller
Victron Multiplus-II 48/5000/70
Battery 1 - 280AH x18s LiFePo4, Daly 150A BMS, Parralel protection…
-
The OCA have just back ported OCPP 2.0 features to OCPP 1.6-J only. Do the SteVe team have any plans to support this new part of the standard? See:
http://www.v2g-evse.com/2018/12/18/open-charge-al…
-
Hello! Electrical engineer here.
I know that the voltage to which you charge your batteries (and to which you discharge them) impacts their longevity. However, with my background, I also know tha…
-
According to a recent leak, car firmware 2021.36+ supports remotely adjusting the charge rate via the API. This means TWCManager could support cars connected by UMC, Gen3 TWC, etc. once the specific A…
-
Hi,
since yesterday, Werner's charging rate is very low. The charging current is typically below 2A and is fluctuating wildly. The 'charger_status' field internal_error_flag is True and 'const_curre…
-
**Describe the problem you have/What new integration you would like**
The [Gecko IN.YE](https://www.geckodocs.com/yseries) Spa main controller has the option to be controlled via an external [I…
-
### What is your question?
I'm making a alert to notify if laptop is plugged in or not , but when use battery_plus in state Full, i cant detect that Laptop is charging or not.
Can some one help me ?