-
Could someone in the know "document" how a user would go about programming the micronucleus bootloader and the user program with one hex file?
Example Use Case:
End-Product is a hobby device with a …
-
Can we take the T100 hardware design and have it behave as a USB serial port rather than an HID device? The T400 will be a USB serial port, so it might be good to to have them behave the same way.
-
After fixing #192 ... this next compile error showed up:
Arduino: 1.6.5 (Windows 7), Board: "Digispark Pro (Default 16 Mhz)"
Using library FastLED in folder: C:\EE\microController\Arduino\libraries\F…
-
Hi,
I wanted to speed-up the boot time and I played with the AUTO_EXIT_MS delay, so that the Digispark waits less before starting the program.
At 1000ms it was ok. I tried 250ms and now it is not resp…
-
Hi there,
Not sure if here is the good place to mention that...
NeoPixel with digispark runs perfectly but as soon as I include digiusb, just include the file, before or after including neopixel, I ca…
-
With Arduino 1.6.4 there is a "Boards Manager" which allows to include third-party boards into the Arduino IDE.
There are already many third-party boards supported (https://github.com/arduino/Arduino…
-
Tried writing 2.0b hex file to attiny167. Worked successfully but chip doesn't respond at all now. Haven't tried high voltage reset just yet but I'm wondering could it be the fuse settings? Or perhap…
-
I got a working T100 form the Electronics version 0.1 boards. I had to transplant the ATtiny from a DigiSpark to make it work. I then successfully loaded the T100 firmware with `make program`.
When I…
-
> "Arduino IDE - Digistump Release 1.5.8C.app" is damaged and can't be opened. You should move it to the trash.
System: Mac Air OS X 1.9.5 8G
1.5.8B has same problem. Is this no longer the IDE to us…
-
Not sure where to begin debugging this...
```
bundle exec ./upload.rb ../upgrade/releases/micronucleus-1.10-upgrade.hex
parsing input file as intel hex
Plug in programmable device now: (waiting)
Atta…