-
**Describe the bug**
The site at https://slackinvite.squishedmooo.com is not responding
**To Reproduce**
Steps to reproduce the behavior:
1. Go to https://slackinvite.squishedmooo.com
**Addit…
-
Hi,
thanks for your work, sounds very promising :-)
but when building the sketch i've this error:
Arduino: 1.8.8 (Windows 10), Board: "LOLIN(WEMOS) D1 R2 & mini, 80 MHz, Flash, Enabled, 4M (no…
-
Full error:
```
Arduino: 1.8.10 (Linux), Board: "LOLIN(WEMOS) D1 R2 & mini, 80 MHz, Flash, Legacy (new can return nullptr), All SSL ciphers (most compatible), 4MB (FS:2MB OTA:~1019KB), v2 Lower Memo…
-
Hi, i have installed tasmota on my LOLIN D1 mini and i'm using the IR controller shield and the SHT30 shield. They are working fine but i would like to add the PIR shield, the problem is that he use t…
-
Hello everybody,
I would like to flash my wemos d1 mini Pro and connect a PZEM004t V3.
So far I have added the PZEM zip under Arduino IDE and now only has to configure the rest with Atom.
Under…
-
Firstly, thank you for all your ongoing efforts on this great project.
I've been trying to get this to work for a while now but keep running into the same issue. I can configure the device to conn…
-
Hi,
using irremote latest on a D1 Mini and a or shield from lolin
Irremote works perfectly when D1 Mini runs at 80mhz but signal appears to be really "weak" when D1 Mini runs at 160MHz.
Please …
-
Getting this issue at compile time. Did I miss a note somewhere? Using 1.8.9 of IDE.
Flash of graphics to spiffs worked fine. Not worried about warning.
WARNING: library Timezone claims to run …
-
I tried to compile the latest version. Everything seams to be ok, I got no error messages, the upload is fine and the serial monitor give me the right output BUT the display doesn’t work.
When I reu…
-
Здравствуйте.
При попытке повторить устройство столкнулся с проблемой: работает только первый светодиод (выбрана плата LOLIN(WEMOS) D1 R2 & mini, если выбираю плату WeMos D1 R1 - то работает только п…