-
@dannyjacobs's class was trying to install our setup and ran into some issues:
>Here are the major errors we keep running into when trying to execute the blocks generated by gnu companion.
> “Wa…
-
When single site experiment is run the following standard error appears on the logging panel:
```
Traceback (most recent call last):
File "c:\cockpit\cockpit\gui\dialogs\experiment\singleSiteEx…
-
Running Ubuntu 18.04 on laptop. Below is the output of the build with a few errors that may explain the issue but unsure why we are getting them. Also when getting prerequisites installed the libgnura…
rwcts updated
4 years ago
-
Hi Pavel,
I am investigating your VNA to measure and calibrate radios for our local museum of radio, California Historical Radio Society, https://www.californiahistoricalradio.com/. Most consum…
-
Hi Pavel,
I have been reading the zynq TRM chapter 16 about Gigabit Ethernet controller on Zynq PS.
I see on your SDR_transciver project you use ethernet_0, where the idea is to transmit etherne…
-
### Description of the setup:
* Device: RP 122.88-16
* SD card image: red-pitaya-alpine-3.9-armv7-20190527.zip
* Application: Alpine image
* Other relevant information:
### Descript…
-
Hello,
I have installed soapysdr in my linux environment (18.04) and my plutosdr is detected by the soapysdr-util tool. I know the plutosdr is not hpsdr compliant but I also saw that you seems to b…
-
### Description of the setup:
* Device: Red Pitaya
* SD card image: Provided by RedPitaya, this one : https://redpitaya.readthedocs.io/en/latest/quickStart/SDcard/SDcard.html
* Application…
-
SDRAngel (https://github.com/f4exb/sdrangel) supports a connection to KiwiSDR via websocket in it's newest release.
It works quite well when connecting to different hosts from e.g. the sdr.hu list.…
-
### Description of the setup:
* Device: Redpitaya
* SD card image:
* Application:
* Other relevant information:
### Description of the problem:
It might be a quite elementary problem…