-
Servo library allows to control a servo by sending pulses to the servo. Using the library with UNO R3 gives correct results : a constant pulse duration in `myservo.write (int)` gives a stable servo po…
-
Hi there, I am planning to use the Pulse sensor on attiny85 chip. But looks like the code uploaded online have to be modified due to the fact that attiny85 does not have timer2 and serial communic…
-
Hi,
I'm using the BLE Nano V3.0 to try to achieve a bluetooth connection between the BLE Nano and Windows Desktop, using the Bluetooth LE Explorer tool. I'm able to setup the connection and I can w…
-
Hi folks,
I have observed an issue when sending UDP broadcast messages with my Arduino MKR WiFi 1010.
When running the Arduino as access point (AP mode, using `WiFi.beginAP()`) more than 80% of …
-
Hi all,
Yesterday, I bought a UPS for the first time in my life, and was eager to dive into NUT. But not all is working as expected... I saw a similar thread started on 18 October, but it didn't he…
-
```
Add #defines for RX and TX (and RX1, TX1, etc) so we know which pins are on the
UART and used for communication with the computer.
```
Original issue reported on code.google.com by `dmel...@gmai…
-
```
Add #defines for RX and TX (and RX1, TX1, etc) so we know which pins are on the
UART and used for communication with the computer.
```
Original issue reported on code.google.com by `dmel...@gmai…
-
`GSL1680 TS = GSL1680(true, true);`
> GSL1680::GSL1680(bool error, bool info)
> 12:58:02.129 -> GSL1680: Start boot up sequence
> 12:58:02.257 -> Toggle Wake
> 12:58:02.289 -> Clear reg
> 12:…
-
First of all, thank you for creating this library and all the documentation in the `README.md`. This was extremely helpful in getting the driver working.
Right now, I am only able to control my ste…
-
*/
#include
/*
This sketch example works with IMUBleNotification.ino
IMUBleNotification.ino will send notification to this central sketch.
This sketch will receive the notifications an…