-
### Description
Using a cloned BLTouch (one with "3DTouch written on the side) enabling the part fan (set to every level I've tested) will cause the probe to periodically deploy on its own for no…
-
If there is an M25 command in the G-code or it is sent via the terminal, the printer will not pause printing correctly and the process will freeze - the printer RESTART is required.
Pause printing is…
-
### Bug Description
Sensorless homing sensitivity issues with Quick_Home enabled.
With sensorless homing, when Quick_Home **is not enabled**, both X and Y axis home smoothly. No issues.
However…
-
### Bug Description
When using `LEVEL_BED_CORNERS` on `bugfix-2.0.x` (852a8d6685ec1137eb65e78fa748cae41fbd36b), the UI quits out early without pressing `Done`.
### My Configurations
[conf…
Knifa updated
4 years ago
-
### Bug Description
I am running the SKR mini E3 v2.0 with a BLtouch v3.1 and I am having problems with probing. Most of the time, probing is successful, but occasionally the probe fails to tri…
-
### Description
/include dir missing causing compiling to fail
### Steps to reproduce
1. Download from github
2. navigate to /BIGTREETECH-SKR-mini-E3-master/firmware/V1.2/Marlin-2.0.x-SKR-…
-
I am trying to run my SKR E3 DIP with TMC2208 drivers on the X and Y axes, and A4988 drivers on my Z axis and Extruder. When I try to compile without making any other changes I get an error related to…
-
About a week and a half ago, I updated my SKR Mini E3 V1.2 & TFT35 E3 V3.0 to Marlin 2.0.5.3 by placing the compiled firmware.bin file in the root directory of my sd card. I put the sd card into the …
-
### Hi, I have a Creality Ender 2, I just got an SKR 1.3 board, and after compiling Marlin 2.0 and putting it on the SD card, rebooting the board, the screen is lit (backlight) but blank.
I h…
-
Hello,
any plans to add the TMC 2209 ?
Looks like it's a combination of the TMC 2130 and TMC 2208.
thx