-
Hi,
i am trying to run esp32 S2 examples
https://github.com/StuartsProjects/SX12XX-LoRa/tree/master/examples/SX128x_examples/ESP32/Basics
but no matter what timeout i will set DIO1 is always low …
-
Hello, I'm making a port of LoRaMac and strange behavior is happening. When I'm sending a packet to network server the packet is being received, but for some reason, the IRQ_TX_DONE flag is not being …
-
**Describe the bug**
When my tlora-v2 is connected to a PC via USB and then connected to with screen/tio/meshtastic the display shows a progress bar over top of the current display, which kind of fli…
-
Good morning @beegee-tokyo @ivankravets
First of all, congratulations!
I have some questions
-have you plan to port to STM32 ? I ask you because i have a lot of LoRa modules here and they u…
-
Hi @matthijskooijman ist possible that this lib will be work with the SX1262 from semtech?
Im using a ESP32 and E22-900M22S with SX1262
-
Add SX1262/68 support to RadioLib.
Main issues:
1. SPI interface is different than SX127x series.
2. Additional BUSY pin is required.
Originated in https://github.com/jgromes/LoRaLib/issues/53
-
**Describe the bug**
`sx1262::setFrequencyRaw` doesn't check the return code from `setRfFrequency` and always returns `ERR_NONE`.
**To Reproduce**
I noticed this trying to figure out why my radio…
-
Hey, I'm having trouble setting up the SPI transaction in working properly. My current setup is using a STM32F103RB with the SX1262MB2xA5 board as an attachment. I modified the example transmit and re…
-
Not sure if it is a bug or a limitation.
I send a structure with the size of 34 bytes
```cpp
struct dataPckg
{
char rcvAddr[8];
char sendAddr[8];
char type;
char data[16];
…
-
**Describe the bug**
SX126x modules cannot be woken with the library, instead one must manually wake the unit with a digital write to its select pin.
It looks like in `SX126x::SPItransfer`, moving…