-
Hi,
I have put together the two devices according the following schematic:
ArduCAM Camera ———- WeMos D1 mini
============== ======================
CS ————————-– D0 (GPIO 16)
MOSI ————————-…
-
Hi community, i have Wemos Lolin32, and a TFT display recognized by id 0x4532 (mcufriend 2.4 inch TFT LCD shield). I have connected just RS to 15, CS to 33 and RST to 32, but the display is very dark.…
-
### Summarize of the problem/feature request
When there is a lot of traffic on the WiFi network or the node is too busy it seems that some send/ack frames on layer 2 get lost and are net or not in …
-
trying to read a bme280 (sda on gpio0, scl on gpio2) on wemos d1 mini using espurna-1.13.3-wemos-d1mini.bin but with no success... i don't understand if i2c support is enabled or not in this binary, a…
-
Marlin 2.0 now has the function of enabling a second serial connection to the board
https://github.com/MarlinFirmware/Marlin/blob/902d5b0f8ba2f46f30fa063b7d2ab8b6193339cc/Marlin/Configuration.h#L11…
-
https://github.com/Bodmer/TFT_eSPI/issues/307
-
Howdy!
I am not a connoisseur of the arduino, I only rebuild projects that already work. In this case "WeMos-Matrix-Shield" by Charles Hallard (https://github.com/hallard/WeMos-Matrix-Shield), base…
-
The current version of the DHT sensor Library does not support the new DHT1 version 2.0.0, shortly the DHT12. There exists a library at [Github by WEMOS](https://github.com/wemos/WEMOS_DHT12_Arduino_L…
-
I've created a doorbell using a Wemos D1 mini pro but forgot to write down how I've setup Tasmota.
For those interested: 230v AC will be converted to 5v DC using a Hi-Link HLK-PM01, this provides pow…
-
### Description
ESP8266 is only supported when ARDUINO_ESP8266_NODEMCU is defined. This isn't the case for, e.g., Wemos Mini D1.
### Steps To Reproduce Problem
Run Simple_Test example on We…