-
Hi, we have 433Mhz devices, what can we do?
-
When I use the example sketch for OTAA, in combination with a Murata module, I can't get it working. In my gateway I do see an activation package coming in from the node. But then the activation never…
BoelD updated
6 years ago
-
When I use the LMIC library with the 868 band configured in `lmic_project_config`, I get an error when I compile the ABP example. The error indicates that BAND_MILLI and BAND_CENTI are not configured…
BoelD updated
6 years ago
-
I'm trying to compile your code, but I keep getting the sketch too big error.
Everything look correct?
![untitled](https://user-images.githubusercontent.com/26949927/36395651-c90e6576-157f-11e8-…
-
Hi ,
I recently ordered the board from pcbs.io but so far haven't been able to get it working.
Tried it with your LMIC fork version both with and with out the diodes.
Has any one been able to succ…
-
I'm sure it's something that I'm doing wrong, but it seems this code is too big for a pro mini 328.
Error:
Sketch uses 35516 bytes (115%) of program storage space. Maximum is 30720 bytes.
Global …
-
My end nodes are not receiving any ACK from device against confirmed uplinks. As a result, the device keeps on sending the same uplink for a prefixed number of retries (programmed in the device).
W…
-
This code looks wrong.
https://github.com/mcci-catena/arduino-lmic/blob/896fb808eae627ae18c4a3b01a66fd411c857ec9/src/lmic/radio.c#L426-L435
1. If `pw` is 16, it will pass through unchanged, but …
-
Hai ,
Iam new to lora,
Iam using this example https://github.com/mcci-catena/arduino-lmic/tree/master/examples/raw-feather and i configure config.h file to (#define CFG_in866 1 and #define CFG_sx12…
-
You need to do it for both.. DEVEUI and APPEUI