-
Hi @alexbain , thanks to your work over the years I've been able to use lircd to control my Daikin A/C unit with my RPi2.
I've recently re-setup my HomeAssistant in a docker container, which means…
-
Any idea if this should be compatible with the newer "Daikin Stylish airco FTXA20AW" unit? I don't see it mentioned in the list, and no idea how to find out!
-
Would it be possible to have something like an http accessory?
Like such: https://www.npmjs.com/package/homebridge-httpeverything
-
### Configuration
**Operating system**: Windows 10 64 Bit
**PlatformIO Version** (`platformio --version`): PlatformIO, version 3.5.3a8
### Description of problem
I've got a pretty big (aro…
-
**IMPORTANT NOTICE**
If you do not complete the template below it is likely that your issue will not be addressed. When providing information about your issue please be as extensive as possible so th…
-
Hi all.
I'm installed this web gui and use it for manage my Daikin FTXM unit.
Now I'm trying to switch on/off the unit via http but I do not understand how I do it .
( my idea is use curl or some…
-
some comments about colour temperature:
* the secondary device has 3 levels 0=cold, 10=normal, 20=warm.
It might be more handy to have 0=off and then 10 cold, 20 normal 30 warm
Currently when cli…
-
Hi, I'm having some problems compiling firmware for my Sonoff basic. via Arduino IDE.
I'm following this guide and when I try to compile/verify the .ino file I have this error:
https://github.com/ar…
-
I keep getting this message and cant find a answer on the web.
Arduino: 1.8.1 (Windows 7), Board: "Generic ESP8266 Module, 80 MHz, 40MHz, DOUT, 115200, 512K (64K SPIFFS), ck, Disabled, None"
…
-
On every lauch of openHAB all KNX binding commands will be activated once, so all my lights will be switch on or off, dependent on current status. After the launch, everything works fine.
I work with…