-
Kernal 4.19.38-sunxi
Ubuntu 18.04.2
ARMBIAN 5.75 stable
Orange Pi Zero board
Wifi chip used rtl8188cus
After compiling the driver, I made the wifi interface an AP using hostapd v 2.7
When I …
-
The website has been successfully updated, but the Readme on the github page does not render the styling of the tested boards table.
If I am correct, this readme is not linked to the website direc…
-
Hi Everyone!
I'm using a DEVKIT V1 (ESP32 WROOM 32) to test my project, but when i start a BT connection with my Android using the internal DAC of ESP32 i hear a lot of noise when music played (of …
wamk9 updated
3 months ago
-
Hello and first of all congratulations for this fabulous project!
I have a problem:
After soldering all the components on the PCB and after having assembled everything, the card refuses to start, …
-
something has broken in the last month or so. this always worked for me. now it doesnt.
First install ESP-IDF, install for target esp32c3 and activate py environment:
```
mkdir ~/esp
cd ~/esp
g…
-
When trying build for the pi, the build fails with this output:
`make ARCH=arm CROSS_COMPILE= -C /lib/modules/3.13.0-24-generic/build M=/home`
`/path/to/rtl8812au modules`
`make[1]: Entering direc…
-
The Hardware section of the ESP32-radio V2.0 Manual states that the ESP32 module is basically an ESP32 on a small print. You used a DOIT ESP32 Development Board.
In the Arduio IDE version 1.8.19, t…
-
Hello, im trying to compile elixir library into .avm pack using mix atomvm.packbeam
Only errors left I have is -
error: following modules or functions are not available on AtomVM:
* Elixir.Enu…
Ridtt updated
1 month ago
-
I have built it from sources for M0S Dock and the device is not stable. Sometime it freezes during communication but typically it cannot be detached from device and hangs when closing the connection.
…
-
### The problem
Helly
I try to get running a Raspiaudio muse proto for voice assistant. I installed the voice assistant module with the esp-idf framework. Its so far its running... sometimes. The vo…